Benefits of Heater Maintenance in Conroe, TX!

Are you looking to increase the efficiency of your home heating system? Do you need a regular heating maintenance service in order to make sure that it is running at maximum potential? If so, you should consider scheduling a regular heater maintenance in Conroe, TX. While this may seem like quite an unneeded expense, it can actually save you money and improve your overall comfort level. Here are just a few of the benefits that come along with having regular HVAC maintenance performed on your furnace:

1. Improved Efficiency: This is the primary reason why anyone would want their furnace serviced on a regular basis. A well-maintained unit will not only produce higher quality heat, but it will also use less energy to do so as. When units don’t receive the proper maintenance or heater service in Conroe, TX, they are forced to work harder. This takes more energy and provides less heating.

2. Improved Safety: A well-maintained unit is not only safer but it is also more efficient. When you schedule regular HVAC checkups on your furnace, the technician can make sure that all of the working parts of your system are safe and working properly. While performing heater installation in Conroe, TX, they will look for faulty wiring or broken sensors that might be a danger to you or your family if left unattended.

3. Longer Life-Span Of Your Furnace: Many times homeowners will go years without scheduling a furnace maintenance service because they think that doing so won’t affect their overall furnace life-span., one of the best ways to ensure that your furnace has a long life-span is to have regular maintenance performed.

4. A More Comfortable Home: While you might think that your furnace is running perfectly fine, it’s actually not doing as good of a job as you believe it is. In fact, most units only run at about 50% efficiency when they are brand new and don’t receive proper maintenance on a regular basis. Scheduled HVAC checkups will keep your unit working at the highest possible heat levels so that you can be comfortable in any environment.

In conclusion, there are many benefits associated with having regular furnace maintenance performed on your heating system. If you want to conserve energy and increase the comfort level in your home, make sure to schedule heater maintenance in Conroe, TX.

Call Wrightway Comfort at (346) 202-5101 for more information.

Five Common Problems of a Gas Furnace and its Solutions

Very warm and comfortable in bed with your furnace running at a constant temperature during a cold winter morning. Suddenly the temperature is down and starts to freeze with the furnace not operating properly or not working at all. What to do? Here are the top five furnace problems and ways to solve them. Before calling for furnace repair Tomball, TX, ensure to check these guidelines shared by Wrightway Comfort.

1. The furnace not producing heat at all is one of the top repair complaints raised by most of the homeowners. Defective thermostat, the temperature is set very low, diffused pilot light, the circuit breaker is blown out, unopened gas valve or any electronic ignition problems could be the many causes of this issue. Check the function of the thermostat by adjusting the thermostat, check the pilot light by relighting, change the circuit breaker or blown fuse, and troubleshoot the electronic ignition or thermostat.

2. If the furnace does not produce enough heat that it should provide, dirty gas burners or a dirty air filter could be the cause of blocking the airflow. Cleaning the burners and replacing the air filter could solve the problem. Call a heater repair technician if you are unsure of cleaning or replacing the air filter and the gas burners.

3. The blower running continuously could be due to the thermostat being set at a fan on mode. If your thermostat has no settings, a defective fan or bad fan switch could be the issue. Adjusting the setting of the thermostat to auto mode is one solution. For the other issue, replacing or repairing the fan control switch with a new one can solve the problem. Contact Tomball, TX heater installation experts for assistance.

4. Is your furnace have a very often turn on and off-cycle? The heat anticipator in the thermostat may be the problem causing this issue. A faulty blower motor or a dirty air filter can also be the issue. Check by replacing the air filter with a new one. If the problem is not solved, adjust the heat anticipator of the thermostat or restart the blower motor. Lubricate the blower motor or its belt with oil. 

5. Heavy noise from the furnace is one issue faced by the homeowners. Any faulty or damaged components or parts in the furnace may cause this problem. For such issues, it is better to call a professional technician to check, inspect, and carry out the service.

The best gas furnace repair or replacement service in Tomball, TX is provided by the Wrightway Comfort Company.

Guide on the Safety Measures of Having an Oil Radiator Heater

Looking to get heater installation Tomball, TX? The oil heater is the type of heater that is used to warm up small rooms or small houses. This type of heater shaped like a radiator contains a special type of heating oil that can heating elements in it, which can warm up the place by circulating the oil through the chambers of the radiator. But there are few risk factors involved in using an oil radiator heater.

What are the risks involved in heater installation?

It is never promised to be completely prevented, but few safety measures can be followed by the homeowners to avoid any kind of dangers from the heater. Some of the safety measures are listed below. If you are an oil-filled radiator heater user, then read carefully, understand it, and avoid any unnecessary risks from the heater. It is always recommended to call Wrightway Comfort professionals for heater installation Cypress TX.

Be careful in choosing the wires for the heater. Never use the wires that cannot tolerate the load required by the radiator. If it exceeds the load that can be bear by the wires, then there are many chances of overheating that can even end up as a fire accident. Thus, one has to be very careful in choosing the right wire that can bear the maximum load of the radiator.

Things to consider as part of heater maintenance Cypress TX!

The users should use the internal mechanism. It is best to go with the thermostat and the inner tool of the radiators itself. Thinking of using different options of tools, never take any risk of choosing the power with any kind other tools or equipment. This can also lead to the highest risk of overheating of the heater. 

Most of the heater available comes with wheels to easily move around. If it does have, then make sure to tie it in one place. This is mainly because, if your home has kids, they would see every component as a toy, and can try to play with the heater which can end up as a big dangerous situation. Having a stationary system is much advisable. It is ideal to have an eye on the kids or pets so as not to touch the hot surface.

Having a check for overheat protection switches that turns off automatically as the heater overheats are basic. Never have any kind of combustible material near the heater and make sure that there are good ventilation facilities.

To provide you with more tips and suggestions on the heater repair, installation and services, contact Wrightway Comfort for the best team.